Updated AMSAT LVB Tracker to be Shown at Dayton

AMSAT has sold the popular G6LVB Tracker for several years.  This year we will have a new version which replaces the amber LCD display with an OLED (Organic Light Emitting Diode) display.  The new display offers a high visibility contrast with a wide angle of view.  It will be available in blue, green and amber.  LVB Trackers will be available with the recommended serial (RS-232) I/O.  The recommended minimum donation will remain $200.  An FTDI USB/Serial module is available as an option for an additional $25.


Comparison of new OLED (top) and old LCD (bottom) displays

Current LVB Tracker owners may update their own units. The OLED displays used are manufactured by Newhaven, NHD-0216KZW series, and are available from Mouser and other online parts suppliers.   The OLED displays have less depth so the PEM fasteners need to be shortened for correct fit and viewing thru the front of the case.  The LVB Tracker firmware will also require updating.  Current owners may send their LVB Tracker to WB8CXO for retrofit if they don’t wish to do the modifications themselves.  Upgrading existing trackers will be $50 + shipping.  Contact WB8CXO for upgrade details.

AMSAT would like to acknowledge the many contributors to this effort.  Mike Young, WB8CXO for his vision and initiative to develop this update.  John Drago, W8FAA modified the LVB Tracker firmware to support the OLED display.  Ken Baker from Ridge Machine manufactured the PEM fastener cutting jig.  Steve Belter, N9IP, Mark  Hammond, N8MH and John Papay, K8YSE did beta testing. And finally Gould Smith, WA4SXM, LVB Tracker project manager for his continuous guidance and support.

Details on the Tracker may be found at www.lvbtracker.com.

Dayton AMSAT/TAPR Banquet Reservations Close Tuesday, May 14th!

If you have not yet made your reservations for the AMSAT/TAPR Banquet, please make them by Tuesday, May 14th, 1800 EDT.  Because of the requirement that the caterer have a final count, no more reservations will be accepted afterwards, either on the AMSAT Store or at Dayton.  This is a great opportunity to mingle with your fellow techies, as well as hear a fascinating speaker!

Information on this and other AMSAT social activities at Dayton can be found at:

AMSAT Dayton Social Activities


AMSAT is Moving at Dayton, but not very far!

This year there will be some changes in the Ball Arena, and the AMSAT exhibit will be part of that change.  For the past several years, we have been is a single line, directly across from the ARRL exhibit.  Beginning this year, we will have a 3 X 3 booth arrangement, with the engineering and software display on one side of the aisle, and the donation and display area on the opposite side.  The booth numbers are now 444-446 and 433-435.  We will be very near the old exhibit area, within sight of the ARRL exhibit. The new Ball Arena layout should make access to all the exhibits easier.

A PDF file of the Hara Convention Center, including the new Ball Arena layout can be found here.

AMSAT-NA Board of Directors Nominations Solicited

AMSAT-NA Board of Directors Nominations Solicited

It is time to submit nominations for the upcoming open seats on the AMSAT-NA Board of Directors. A nomination requires either one Member Society or five current individual members in good standing to nominate an AMSAT-NA member for the position. Four director’s terms expire this year: Barry Baines, WD4ASW, Alan Biddle, WA4SCA, Drew Glasbrenner, K04MA, and Tony Monteiro, AA2TX.

In addition to traditional submission of written nominations, which remains unchanged and is the preferred method, nominations may be made by electronic means. These include e-mail, FAX, or electronic image of a petition. Electronic petitions should be sent to [email protected] or faxed to 301-608-3410. Written nominations, consisting of names, calls and individual signatures should be mailed to: AMSAT-NA, 850 Sligo Ave #600, Silver Spring, MD, 20910.

No matter what means is used, petitions MUST arrive no later than June 15th at the AMSAT-NA office. If the nomination is a traditional written nomination, no other action is required. If it is other than this, i.e. electronic, a verifying traditional written petition MUST be received at the AMSAT-NA office at the above address within 7 days following the close of nominations on June 15th. ELECTRONIC SUBMISSIONS WITHOUT THIS SECOND, WRITTEN VERIFICATION ARE NOT VALID UNDER THE EXISTING AMSAT-NA BYLAWS.

Categories ANS