[amsat-bb] Yaesu G-5500 az issue

Dave Webb KB1PVH kb1pvh at gmail.com
Fri Aug 4 18:59:16 UTC 2017


 Not sure if this will be any help to you or not.



Sent from my Galaxy S7

On Aug 4, 2017 2:55 PM, "Jeff Griffin" <kb2m at arrl.net> wrote:

> I removed the rotor from the tower today and started working on the azimuth
> rotor. When power is applied via left or right control the motor is
> running.
> I carefully split the case and everything appears intact. Grease is still
> good, no missing gear teeth, no metal shavings in bottom of housing. So the
> problem is somewhere in the gearing, or mechanical control. I would like to
> proceed further but have no  exploded view of the inside of the rotor. I
> wouldn't want to proceed without some kind of service manual part
> description view. Does anyone have anything that might help? Does anyone
> have a clue, maybe had this same problem and fixed it?I already have the
> useless Yaesu user manual..
> 73 Jeff kb2m
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

More information about the AMSAT-BB mailing list