[amsat-bb] Re: LCU-3 and ICOM 471 or 271

Doug Faunt N6TQS +1-510-655-8604 faunt at panix.com
Wed Jan 21 14:36:24 PST 2009

That's the way it was set up.  But main window persists in
transmitting out of the second digital window.

I just have assigned the main RX audio channel to that second
instantiation of MMTTY, and it operates as it should.  It's just wierd
that the main logging window persists in actuating the second digital

73, doug

   Date: Wed, 21 Jan 2009 21:26:52 -0000
   From: "Richard Ferch" <ve3iay at rac.ca>


   Are the two copies of MMTTY run from two different folders? This is 
   required in order that each copy can have its own mmtty.ini file. You 
   can set up the MMTTY copy used from DI1 to receive from the left 
   channel (main RX) and transmit using FSK, and set up the copy used from 
   DI2 for AFSK, receiving from the right channel (the 2nd RX). 
   Alternatively, you could set the second copy up for FSK, but that would 
   require a separate serial port for each copy of MMTTY - typically you 
   would do this for SO2R (FSK from both radios).

   I have used such a setup, configured for FSK in DI1 and AFSK in DI2, in 
   SO1V with the two VFOs linked. If you program a couple of function keys 
   with {CAT1ASC} macros to switch the radio between FSK D and AFSK A you 
   can even transmit in FSK from DI1 or AFSK from DI2 as you choose (both 
   copies transmit from VFO A). Using the same configuration in SO2V with 
   the 2nd RX unlinked, the DI2 copy becomes a read-only decoder for the 
   2nd RX and the radio transmits only from DI1 in FSK.

   Rich VE3KI

   --- In N1MMLogger-Digital at yahoogroups.com, Doug Faunt N6TQS +1-510-655-
   8604 <faunt at ...> wrote:
   > I've got a dual-RX K3, and have N1MM runnig with two copies of MMTTY.
   > But in trying to get thing figured out, I find I'm transmitting from
   > the wrong window.  I have to be "in the seocnd window" to TX FSK.
   > But the first window is the main RX and since I;m not in split, that's
   > my TX VFO.
   > What have I got confused?
   > 73, doug

More information about the AMSAT-BB mailing list