Satgen75 UOSAT3 OSCAR 14 SOFTWARE by GM4IHJ 3rd Sept 90 The software required for Uosat3 operations has three main parts :- 1. Tracking and Doppler programs 2. Ground Client station software for both the bulletin board mode and the broadcast mode. 3. Telemetry decode and display software TRACKING AND DOPPLER software is available now :- N4HY's QUIKTRAK is very good Silicon Solutions GRAFTRAK is good but perhaps more elaborate than is absolutely necessary. KANSAS CITY TRACKER software is sold in various packages for computer auto control of Azimuth and Elevation rotation. KANSAS CITY TUNER software is sold as an adjunct to the K C Tracker,or separately from it. Summary . Whilst something like Quiktrak is essential to a Uosat3 ground station, the other software mentioned above comes in the category of " nice to have but not essential " GROUND CLIENT STATION software is gradually becoming available. It will use standard AX.25 connected mode featuring a special " CLIENT " program running on the ground station computer. This uses a broadcast protocol for messages of interest to more than one station, which is transmitted in AX.25 U1 frames containing binary data. To receive this binary data a TNC using KISS ( or some other host mode ), will be required. Specifications of the protocols used ( BBS File Transfer, Broadcast , and File Header ), will be distributed in this years ARRL Computer Network Proceedings, and , in parallel, Compuserve will commence electronic distribution in early September 90. This will be followed after an interval of about 2 months by distribution of a simple share-ware version of the BBS mode and Broadcast mode in source code format ( IBM executable ). Then in early 91 , a full commercial quality version of the client station software should be available for IBM's and clones from AMSAT's UK and NA. Please note this ground station software will serve Uosat3 Oscar 14, Pacsat Oscar 16 and Lusat Oscar 19. Experiment and Whole Orbit Data files will be available through this BBS interface. TELEMETRY A program which receives Uosat3 telemetry is already available from AMSAT UK. It is called DTLM.EXE Grateful Thanks to G0/K8KA for this information. 73 de John GM4IHJ @ GB7MAC