[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Fw: ISS crossband tips for SAREX



----- Original Message -----
From: cor<mailto:kenwoodtrx@hotmail.com>
To: Scott Avery WA6LIE<mailto:wa6lie@msn.com>
Sent: Friday, July 22, 2005 2:53 AM
Subject: ISScrossband tips for SAREX?


Maybe also intresting for SAREX?

Hello All,

There are a few things what you should know to operate the ISS repeater.
Do not use too loud mic-modulation otherwise the repeater goes off for a few
moments.
The squelch level in the ISS repeater is at a high level so it requeres to put
a strong -
signal on the TX (70cm) uplink to ISS.
The best way to operate the repeater useing a 70cm yagi with elevation rotor.
When you do not have an elevation rotor you can trie to mount it with 30
degrees
elevation (works fine here!).

http://pd0rkc.mine.nu/ISSPICS/antiss.jpg

And of course doppler correction is very important.

http://pd0rkc.mine.nu/issdoppler.html

Good luck and make some nice audio recordings in your area pse send to
isszarya@hotmail.com

73's Cor PD0RKC
ISS info: http://pd0rkc.mine.nu
----
Via the sarex mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe sarex" to Majordomo@amsat.org



AMSAT Top AMSAT Home