[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: uplink freq



Hi.. is there any shareware software for satelites operation these days... I
think what I used to use was Quiktrak... anything reasonably the same out
there...? 73 de Jordan....

Sil - ZL2CIA wrote:

> Hi,
>
> Unfortunately, this is now incorrect. I have already written to the ANS
> editors who will correct it in upcoming bulletins.
>
> up is 145.990 MHz
> down is 145.800 MHz
> Unproto is CQ via ARISS (RS0ISS-3 still works, but the correct callsign for
> the digi is ARISS)
>
> Sil - ZL2CIA
>
> At 09:13 3/03/04 -0500, you wrote:
> > From the latest ANS...
> >
> >Sil, ZL2CIA, reports to ANS:
> >Those of you who like to run Sgates will be pleased to know that the ISS
> >digi is active again and handling APRS traffic. I successfully passed a
> >number of packets via the station this evening. (see below). Ironically, it
> >has probably never been turned off - it just looked that way. The problem is
> >simply that the Rx on the ISS has been tuned to a different frequency than
> >that listed.
> >
> >The current configuration is
> >
> >Downlink 145.800 MHz (with Dopler)
> >Uplink 145.825 MHz (with Doppler)
> >Digi Callsign is RS0ISS-3
> >
> >
> >--- snip ---
>
> ----
> Via the sarex mailing list at AMSAT.ORG courtesy of AMSAT-NA.
> To unsubscribe, send "unsubscribe sarex" to Majordomo@amsat.org

----
Via the sarex mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe sarex" to Majordomo@amsat.org



AMSAT Top AMSAT Home