[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

PSE NO CONNECTS VIA R0MIR!



Hello All....

Here is some more usefull info that some of you might be able to use!

This is a COPY of a forwarding secession to MIR.

R0MIR-1>WA6LIE-3/1 [11/27/98 18:34:11]: <<UA>>:
R0MIR-1>WA6LIE-3/1 [11/27/98 18:34:12]: <<I00>>:
[KPC9612P-8.1-HM$]
32067 BYTES AVAILABLE
THERE ARE 82 MESSAGES NUMBERED 9125-9403
Welcome to R0MIR-1 MIR Space Station Personal Mail System
ENTER COMMAND:  B,J,K,L,R,S, or Help >

WA6LIE-3>R0MIR-1/1 [11/27/98 18:34:13]: <<I01>>:
[KPC9612-7.0-HM$]

R0MIR-1>WA6LIE-3/1 [11/27/98 18:34:14]: <<I11>>:
>

WA6LIE-3>R0MIR-1/1 [11/27/98 18:34:15]: <<I12>>:
SB R0MIR @ R0MIR < WA6LIE

WA6LIE-3>R0MIR-1/1 [11/27/98 18:34:19]: <<RR2>>:
R0MIR-1>WA6LIE-3/1 [11/27/98 18:34:19]: <<rr2>>:
R0MIR-1>WA6LIE-3/1 [11/27/98 18:34:26]: <<RR2>>:
WA6LIE-3>R0MIR-1/1 [11/27/98 18:34:27]: <<rr2>>:
R0MIR-1>WA6LIE-3/1 [11/27/98 18:34:28]: <<I22>>:
OK

WA6LIE-3>R0MIR-1/1 [11/27/98 18:34:30]: <<I23>>:
PSE NO CONNECTS VIA R0MIR!
R:981127/1833 6@WA6LIE.#WCCA.CA.USA.NOAM
Please refrain from connections to other stations via R0MIR.
This slows traffic to the station and to other USERS.
Using UNPROTO mode is the way to go! K or CONV on most TNC's gets u the
WA6LIE-3>R0MIR-1/1 [11/27/98 18:34:30]: <<I33>>:
re.
Set ur unproto path to GRID SQUARE VIA R
R0MIR-1>WA6LIE-3/1 [11/27/98 18:34:31]: <<rr4>>:
WA6LIE-3>R0MIR-1/1 [11/27/98 18:34:33]: <<I43>>:
0MIR eg.. U CM96EQ Via R0MIR
This will allow you to transmit unproto data,greetings,info to ALL
to see, and no formal connects are involved. Look at ur TNC manual
on the unproto mode! MAKE MIR EASIER FOR EVERYONE!

73, Scott WA6LIE
wa6lie@juno.com or wa6l
WA6LIE-3>R0MIR-1/1 [11/27/98 18:34:34]: <<I53>>:
ie@wa6lie.#wcca.ca.usa.noam

MIREX thanks yo
R0MIR-1>WA6LIE-3/1 [11/27/98 18:34:35]: <<rr6>>:
WA6LIE-3>R0MIR-1/1 [11/27/98 18:34:35]: <<I63>>:
u for you support!


R0MIR-1>WA6LIE-3/1 [11/27/98 18:34:36]: <<I37>>:
>

WA6LIE-3>R0MIR-1/1 [11/27/98 18:34:37]: <<I74>>:
F>

R0MIR-1>WA6LIE-3/1 [11/27/98 18:34:38]: <<I40>>:
*** DONE
>

KR6RC>CM97CJ,R0MIR*/1 [11/27/98 18:34:38]: <<UI>>:


WA6LIE-3>R0MIR-1/1 [11/27/98 18:34:39]: <<rr5>>:
WA6LIE-3>R0MIR-1/1 [11/27/98 18:34:39]: <<D>>:
R0MIR-1>WA6LIE-3/1 [11/27/98 18:34:40]: <<UA>>:
WA7EEJ>N7ING,R0MIR*/1 [11/27/98 18:38:43]: <<C>>:   FORMAL CONNECT!
N7ING>WA7EEJ,R0MIR*/1 [11/27/98 18:38:44]: <<DM>>:  FAILURE
R0MIR-1>N7ING/1 [11/27/98 18:38:48]: <<RR2>>:
WA7EEJ>N7ING,R0MIR*/1 [11/27/98 18:38:58]: <<C>>:   TRYING AGAIN
R0MIR-1>N7ING/1 [11/27/98 18:38:59]: <<RR2>>:
R0MIR-1>N7ING/1 [11/27/98 18:39:09]: <<rr2>>:
R0MIR-1>N7ING/1 [11/27/98 18:39:09]: <<RR2>>:
R0MIR-1>N7ING/1 [11/27/98 18:39:11]: <<rr3>>:
R0MIR-1>N7ING/1 [11/27/98 18:39:13]: <<I33>>:

MSG#9398 11/28/98 03:57:48 FROM N6CO TO ALL
SUBJECT: Spoutnik Keps 11-27
PATH: R0MIR

SPUTNIK 41
1 25533U 98062C   98331.31410754  .00186710  00000-0  11718-2 0   154
2 25533  51.6667 296.9514 0006531  50.5215 309.6590 15.75637076  2517

ENTER COMMAND:  B
R0MIR-1>N7ING/1 [11/27/98 18:39:16]: <<I43>>:
,J,K,L,R,S, or Help >

WA7EEJ>N7ING,R0MIR*/1 [11/27/98 18:39:16]: <<C>>:
R0MIR-1>N7ING/1 [11/27/98 18:39:27]: <<rr4>>:
R0MIR-1>N7ING/1 [11/27/98 18:39:27]: <<D>>:
R0MIR-1>N7ING/1 [11/27/98 18:39:36]: <<D>>:
N0YCE-4>K0ALV-4,R0MIR*/1 [11/27/98 18:39:40]: <<C>>:
N0YCE-4>K0ALV-4,R0MIR*/1 [11/27/98 18:39:52]: <<C>>:
N0YCE-4>K0ALV-4,R0MIR*/1 [11/27/98 18:40:05]: <<C>>:   Look here no luck
N0YCE-4>K0ALV-4,R0MIR*/1 [11/27/98 18:40:20]: <<C>>:
N0YCE-4>K0ALV-4,R0MIR*/1 [11/27/98 18:40:34]: <<C>>:
R0MIR>CQ/1 [11/27/98 18:40:48]: <UI>:
BLN1     :HELLO FROM ALTAIR - MIR 26 CREW

N0YCE-4>K0ALV-4,R0MIR*/1 [11/27/98 18:40:49]: <<C>>:
N0YCE-4>K0ALV-4,R0MIR*/1 [11/27/98 18:41:02]: <<C>>:
====================================================

Notice here as an example of NOT using UNPROTO and <<C>>
Connect protocals.

Formal Connects to ANYSTATION impeedes traffic, and in NOT wise
or very smart. Look into UNPROTO techniques, or APRS style of
transmissions.
=====================================================

For any MIREX or MIR information, look at this site on the web.
http://www.geoworld.com/CapeCanaveral/Lab/3431/mirex.htm

=====================================================
Please refrain from connections to other stations via R0MIR.
This slows traffic to the station and to other USERS.
Using UNPROTO mode is the way to go! K or CONV on most TNC's gets u there.
Set ur unproto path to GRID SQUARE VIA R0MIR eg.. U CM96EQ Via R0MIR
This will allow you to transmit unproto data,greetings,info to ALL
to see, and no formal connects are involved. Look at ur TNC manual
on the unproto mode! MAKE MIR EASIER FOR EVERYONE!

73, Scott WA6LIE
wa6lie@juno.com or wa6lie@wa6lie.#wcca.ca.usa.noam

MIREX thanks you for you support!






----
Via the sarex mailing list at AMSAT.ORG courtesy of AMSAT-NA.
To unsubscribe, send "unsubscribe sarex" to Majordomo@amsat.org



AMSAT Top AMSAT Home