[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: SATpc32 doppler.sqf file (Marc Tessier - VE3TES)



Hi,

Be sure, when listening to beacon sat frequency, that the file
contains the RX and also a "dummy" TX" instead of leaving it to a null
value 0 as suggested. I talked to Erich earlier, because I found a
small concern when switching between a V/U and U/V and then go back to
a U only beacon sat, the software will not choose rhe right VFO. Erich
suggested me to put a dummy frequency instead of 0.

2009/7/22 Marc Tessier - VE3TES <ve3tes@hotmail.com>:
> Thanks to John K8YSE, and also Jean-François Ménard VA2SS. I now have a great collection of birds added to my possible list of satellites...
>
> 73 and CU on the birds soon !!!
>
> Marc Tessier - VE3TES
> ve3tes@hotmail.com
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>



-- 
Jean-François Ménard
VA2SS

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
AMSAT www.amsat.org / Member #37102
ARRL  www.arrl.org
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home