[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: USB to serial converters



Mark,

Keyspans are good.  I have only one, really old, obscure piece of software
which won't work with them.

I got a rig programmer from RT Systems, and picked up one of the RTS-03 as
they guaranteed it would work.  It did, and with everything else I tried it.
Somewhat brand X, but it uses the FTDI chip set.  

http://www.rtsystemsinc.com/othercables_template.cfm?cfid=3106444&cftoken=39
931273

Something to consider is an adapter by Parallax.  Go to WWW.PARALLAX.COM and
put in the part number 28030. It uses the FTDI chip set, and is designed to
be used as a programming controller rather than just a communications
interface, so it brings out a few more lines than does the typical USB to
serial converter.  Some rigs may need those.  With the USB A to mini USB B
cable it is about $20.  I have never found a rig or similar control function
it will not support, even when making house calls.  The only drawback it
that it doesn't really have a case.  With a little Exacto knife work you can
modify a cheap plastic RS shell to fit.

Alan
WA4SCA



_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home