[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: IC-910H data port receiving



Hi Pete,

The 910H has two data ports ( For the Main Band and the Sub Band )

Main Band / Sub Band : Pin 5 - AF Out , Pin 2 is ground ( This is for 
1200bps ops only ). Check which data socket you have connected on the radio 
and open the squelch to check if you can hear the audio in your pc speaker. 
Also check if you have connected the audio cable to the mic in or line in on 
your pc and set the audio levels for the same.

If you are using the Data out ( Pin 4, 9600 baud ) the squelch control on 
the rig has no control. Let me know if this helps.

73, Nitin [VU3TYG]
www.amsatindia.org




----- Original Message ----- 
From: "Peter" <roi@optonline.net>
To: <AMSAT-BB@amsat.org>
Sent: Wednesday, December 17, 2008 6:38 PM
Subject: [amsat-bb] IC-910H data port receiving


> Happy Holidays,
>
> I am trying to receive packet from my data port to the audio in of the
> computer, unfortunately I have not been successful.  I  have a 6 pin mini
> din connector with bare wires at one end, I buzzed out the data out, 
> ground
> is the shell, and made the connection to the stereo plug, no sound.  I'm
> missing something, any help from someone with the Icom would be 
> appreciated.
>
> 73,
> Pete, WB2OQQ
>
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
> 

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home