[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: ISS 9K6 with ICOM 910



A plain mobile FM rig probably will NOT work for 9k6...  you need 
unprocessed (no de-emphasis) discriminator output to your sound card for 
receive, and direct (no pre-emphasis) FM modulation for TX.  Any 
pre-emphasis/de-emphasis cuts off the high audio frequencies necessary for 
9k6, as will the hysteresis of any isolation transformers in your interface.

The 910H, and any other "9600-ready" rig with a data jack that provides 
those 2 connections directly to your soundcard, will work.

73,
George, KA3HSW



----- Original Message ----- 
From: "Curt Nixon" <cptcurt@flash.net>
To: "Alan" <ve4yz@mts.net>
Cc: "'AMSAT-BB'" <amsat-bb@amsat.org>
Sent: Friday, December 12, 2008 8:07 PM
Subject: [amsat-bb] Re: ISS 9K6 with ICOM 910


> Hi Alan:
>
> Yep..I do alot of digital site recording of classical music using
> off-board A/D boxes.  I can tell you that, even great laptops have
> really BAD sound handling ability.  The stock AC97 system can be very
> noisy and I'm sure that would play havoc with 9K6.  An option for
> getting the sound card to work is to let 2 computers talk to one another
> via their sound cards.  I did this early on learning the 1200 baud
> system and it at least verifies most of the system without using up
> prime "pass" time.
>
> You at least have the data ports on your radio--mine are just plain old
> mobil FM rigs so they might never work.
>
> Thanks
>
> Curt
>

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home