[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: ISS 9K6 with ICOM 910



Curt, I appear to be encountering similar results as you.  1K2 - excellent,
9K6 N/G

I continue to experiment with little success using Packet Engine Pro, UISS ,
sound card and FT847.   The FT847 has 2 options -  a data IN/OUT jack and a
PKT 1200/9600 mini-din port.  The 3rd is the external speaker and Mic jacks
which I ignore as an option.  Further, I've used 2 methods to interface the
radio and sound card.

-  SignaLink SL1+ to isolate the PC sound card from the radio PKT 9k6 port
-  other times a direct connect  between the sound card Mic IN/audio Out and
the radio data In/Out

So 2 ways to interface to 2 different radio in/out connections with rather
short passes to fiddle with audio levels on the RX side to get a decoded
signal and on the TX side to trigger a PTT.

Any combination of the above works wonderfully at 1K2

A further complication is the unknown viability of the sound card to handle
the 9K6 well enough to not distort packets and allow the software to decode
the packets.  For now I'm using a Dell notebook.  In a few days I may revert
to a desktop where I can try various sound cards including the one on the
motherboard.

The net result of this 9K6 experimenting is frustration and reversion to the
goode olde PacComm NB96 that works every time and all the time with any dumb
terminal program, stays hardwired so I can check for the resurrection of
GO-32 and is one button push away from 1K2 operation using Wisp32, UI-View,
WinPack or whatever.  UI-View, WinPack and UISS work with AGWPE.  UI-View,
WinPack and Wisp32 work with regular comports or USB virtual comports.

I hate the idea that with today's fast processors that we have to revert to
a hardware solution ( TNC ) instead of a "all software solution".  But  I
don't mind continuing with this experiment. We're facing a long cold winter
in EN19 and the shack is nice and warm and the rotator hasn't frozen up yet
:-)

73, Alan VE4YZ
EN19kw
AMSAT LM 2352






> -----Original Message-----
> From: amsat-bb-bounces@amsat.org 
> [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Curt Nixon
> Sent: December 12, 2008 4:39 PM
> To: 'AMSAT-BB'
> Subject: [amsat-bb] Re: ISS 9K6 with ICOM 910
> 
> What kind of interface are people using between the radio and 
> AGWPE??  
> I've tried my standard soundcard isolation unit but it doesnt 
> seem to send decodable packets and receives nothing from ISS 
> even though I can hear the signals well.
> 
> If the transformers are a problem in the isolation method, 
> what is the alternative?
> 
> I too use UISS and AGWPE for 1200 just fine.
> 
> Curt
> KU8L
> 
> 
> 
> 
> Dave Aitch wrote:
> > Anyone using the 910 on the VHF port for full duplex 9K6 operation 
> > with the ISS ?
> >
> > I use a DSP2232, and of course, the upper part of the 910 does the 
> > transmitting and the lower for receiving, as with GO-32 9K6.
> >
> > The hardware/software I use is HALLOSAT by DB3DH, for rotator and 
> > radio control.
> >
> > I'm using UISS for decoding/displaying.
> >
> > 73, Dave.
> >
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > Sent via AMSAT-BB@amsat.org. Opinions expressed are those 
> of the author.
> > Not an AMSAT-NA member? Join now to support the amateur 
> satellite program!
> > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
> >
> >   
> 
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of 
> the author.
> Not an AMSAT-NA member? Join now to support the amateur 
> satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
> 

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home