[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: ISS 9K6 with ICOM 910



What kind of interface are people using between the radio and AGWPE??  
I've tried my standard soundcard isolation unit but it doesnt seem to 
send decodable packets and receives nothing from ISS even though I can 
hear the signals well.

If the transformers are a problem in the isolation method, what is the 
alternative?

I too use UISS and AGWPE for 1200 just fine.

Curt
KU8L




Dave Aitch wrote:
> Anyone using the 910 on the VHF port for
> full duplex 9K6 operation with the ISS ?
>
> I use a DSP2232, and of course, the upper
> part of the 910 does the transmitting and
> the lower for receiving, as with GO-32 9K6.
>
> The hardware/software I use is HALLOSAT by
> DB3DH, for rotator and radio control.
>
> I'm using UISS for decoding/displaying.
>
> 73, Dave.
>
>
>
>
>
>
>
>
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
>   

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home