[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Your posting on AMSAT



Thanks. So annealing is the must. What did you use to heat it up? I'll be 
using #8 wire. Did you have to use a bender of any type or just pliers?

----- Original Message ----- 
From: "Dave Guimont" <dguimon1@san.rr.com>
To: "Mike Ryan" <mryan301@comcast.net>
Cc: <amsat-bb@amsat.org>
Sent: Sunday, December 07, 2008 11:04 PM
Subject: Re: Your posting on AMSAT


>
>>I saw your posting on AMSAT-BB about building a quadfilar. I have those 
>>files and have been experimenting with various omnis for SAT work. So far 
>>diploes, verticals, turnstiles, and a moxon. The quadfilar was next on my 
>>list. I even scored some copper clad coax for the task. For 70 cm it seems 
>>pretty tough to do the bending and get it right. May I ask how you did 
>>that (a tubing bender, pliers, other) and if you heated the copper wire 
>>first like they suggest.
>
> Anneal the copper tubing for the three copper tubing filars, and it is 
> very easy to shape, simply mark the dimensions on the tubing, and bend 
> away...the length is much more important than the diameter of the bends.
>
> And make good solder joints...heat proof dialectric on the coax one,. of 
> course....teflon, and there are some others...
>
>
>
>
>
>               Pulling for P3E... 

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home