[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Question re rx/tx relays and diplexer

Curt Nixon wrote:

> Do commercial coaxial relays for t/r use short the rx line when in tx? 
> or do they leave it float?

No. I would recommend that you use a second low power relay to put 50R loads across both in and out of your preamp.
> Also, should the 2M output on the diplexer for desense be terminated? or 
> left open.

I think most people leave it open but personally, I would terminate it with a 50R resistor.

Nigel A. Gunn. G8IFF   W8IFF (have also held KC8NHF, M0NHF, 9H3GN)
1865 El Camino Drive, Xenia, OH 45385-1115, USA   937 825 5032
e-mail nigel@ngunn.net             www  http://www.ngunn.net
Member of  ARRL, GQRP #11396, QRPARCI #11644, SOC #548,  Flying Pig #385,
                   Dayton ARA #2128,  AMSAT-NA   LM-1691,  AMSAT-UK, MKARS,  ALC
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb