[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: ao-51 radio programming



You are likely to get some varying answers, but 145.92 paired with 435.310, 
.305, .300, .295, and .290 for the normal repeater, and 145.88 with 435.160, 
.155, .150, .145, .140 for the qrp repeater when active. Some folks like to 
put in the uplink +/- 5khz Doppler shift too, but it's really fine either 
way.

73, Drew KO4MA

----- Original Message ----- 
From: "Eric Fort" <eric.fort@gmail.com>
To: "AMSAT-BB" <amsat-bb@amsat.org>
Sent: Sunday, November 09, 2008 5:40 PM
Subject: [amsat-bb] ao-51 radio programming


>I have a vx-6 I'd like to set up to work ao-51.  what frequency pairs 
>should
> go into the memories?
>
> Eric
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb 

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home