[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: IF-100 Interface



Simon

Check out the code in WispDDE:

Sub IF100RotorSetAzEl(Az, El, Port As Integer)

As Tony says, you need some nasties to talk straight to the parallel port.
You may already have that in HRD for other rotators like the FODTrack.

Cheers & 73, Howard G6LVB

-----Original Message-----
From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On
Behalf Of Simon (HB9DRV)
Sent: 19 October 2008 10:45
To: AMSAT.org
Subject: [amsat-bb] Re: IF-100 Interface

I can be more specific - it's the strobing I need to set.

Simon Brown, HB9DRV
www.ham-radio-deluxe.com

----- Original Message -----
From: "Simon (HB9DRV)" <simon@hb9drv.ch>
>
> Does anyone know how to drive the IF-100 via the parallel port? I am 
> sure I am send the correct commands (I've looked in the WISP code) but 
> am failing to get the hardware to recognise my commands. The same 
> hardware works fine with an old DOS program.
>

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home