[amsat-bb] Re: sstv mixw settings

[Gordon JC Pearce MM3YEQ <gordonjcp@xxxxxxxx>]

Rafael Valdez G. wrote:
>  > hi folks, on mixw, mode settings sstv it says xmit freq 1900 hz and recv,. > freq 1900 hz. my pics are coming in garble, should i change this? If so to > what? any other settting I should have here?
> Hi Jeff,
>  
> I only set the mode to R36, everything worked fine.... also with 1900mhz... you can see the "half" image I captured at 16:16z using MixW 2.18 in
>  
> http://sat-xe.blogspot.com
>  
> 73's de 
>  
> Rafael XE2RV
> DL55lt

I record the pass and then set about decoding it later.  The first 
decode of the ISS image I captured was terribly skewed, but I was able 
to adjust qsstv on subsequent attempts to get it bob on.

Gordon
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb