[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

More: circular polarization (45deg physical distance)



So !

As the discussion is ongoing anyway:

This is how I have done it for 2 meters:
- 2 x 6 elements (phyically same position, no 1/4wave distance
  http://www.pa3guo.com/dk7zb.html
- switch box for H/V/LHCP/RHCP in the shack (2 long cables needed)
  http://www.pa3guo.com/polarizer.html

But now 70cm !
My 13 year old Cushcraft had always fixed circular polarization.
- 435.300 (AO51) had never any fading and was strong
- 435.150 (AO51) I could barely hear (proofs the >20 db separation)

Now: as AO51 will be in an mode that I want to use in the coming
days, with the 435.150 downlink, I needed to change the polarization.

Initially I wanted to have a temporal situation (swapping the
coax on the front dipol), but the screws needed replacement anyway,
so I decided to take the whole antenna down.

The 2x8 elements beam has the 2 antennas mounted 1/4 wave distance
spaced on the boom (the physical method).

Now, I want to be able to switch between LHCP and RHCP. Not fixed.

A good website I found is:
http://sv1bsx.50webs.com/antenna-pol/polarization.html

At the bottom the physical method for CP is described.
Almost what I needed, now I need to be able to switch on top of that.

I would assume that this should still be possible :-)
My preference would be only LHCP and RCHP, no need for Hor or Ver.

Prefer to have eg the coaxes of the 2 beams to a small relay box
on the back of the beam and then with a relais create the RHCP
vs LCHP.... but I lack the schematic for that :-)

... can someone point me to a URL that has the solution described ?

OR: would it be simply this:
1. take the front dipol
2. swap conductor/shielding to create LHCP or RCHP AT the solder points ?

(is this how WIMO is able to get it all in their small boxes)

Well, I have 2 days before AO51 is in the mode I requested,
I really need to get the antenna in place :-)

Thanks !

Henk, PA3GUO
http://www.pa3guo.com










_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home