[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: replacement pots



In about 2 weeks I'll have an AZ and EL on the bench and check measurements.

All the bolts on my Yaesu/Kenpro 5400 rotators are metric so the shaft on
the pot may also be metric.

We will see.



-----Original Message-----
From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On
Behalf Of George Burr
Sent: September 15, 2008 9:03 PM
To: amsat-bb@amsat.org
Subject: [amsat-bb] replacement pots

I found the pots on the old Kenpro rotors to be none standard.
The mounting hole and the turning shaft are smaller than standard and this
could require some more work to fit a "standard " pot because of the
gearing.
I don't know if this is true for the G5400.
73 Geo.
Amsat# 26245

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home