[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

LMR 400 Connectors.




FYI:

Telegartner make Male (Part # B3426) and Female (Part # B3026) Type N crimp
connectors for LMR 400 cable.
According our local Huber & Suhner agent and cable guru, these will crimp
on to both LMR 400 Ultraflex stranded inner cable, and Suhner LMR 400 solid
copper inner cable.
The inner pins can be soldered on to copper coated solid aluminium inner
LMR 400 cable such as Times Microwave.
The bodies are nickel plated, and the inner pins are silver plated. Nickel
is not reccommended for any professional / large radio site installations
because of oxidation / intermod. problems.

Suhner and Rosenberger both make slip fit connectors for solid inner LMR
400 cable. Stainless steel bodies with gold plated inner pins. Very high
quality, and no special tools required; just a knife!

Cheers!
===============================================================
WARNING
This message may contain information that is confidential and may be subject to the provisions of section 61A of the Police Act 1958, which creates an offence to have unlawful possession of Police documents. If you are not the intended recipient of this message or have received this message in error, you must not peruse, use, pass or copy this message or any of its contents.
Also note, the views expressed in this message may not necessarily reflect those of the New Zealand Police.

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home