[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: IC-910H question

It should be a standard stereo 1/8" jack (it is on my 910H)...  for a 
paddle, tip is dot, ring is dash, and shell is common.  You have to set 
"paddle" from the SSB/CW "set" mode, and you can choose normal or reverse 
polarity, or "bug" mode.

George, KA3HSW

----- Original Message ----- 
From: <W0DXZ@aol.com>
To: <amsat-bb@amsat.org>
Sent: Sunday, August 31, 2008 6:01 PM
Subject: [amsat-bb] IC-910H question

> went to plug in my CW  paddle to the back of my  IC-910H,,,  the manual 
> shows
> a standard 1/4 inch phono plug,,, the back of my radio has  something 
> else...
> I havent turned it all the way around to see what it is,   have to 
> disconnect
> lots of wires,,,but it isn't a 1/4 inch plug...
> anyone else notice this?
> Bob DM33

Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb