[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: preamps



Hey Doug,

I use it on both radios.  Improves both radios very nicely.  I can even hear the birds when they go behind the trees, where I couldnt make out the audio before.  Worked all 3 FM birds on it now, and there is a day and night difference on either radio I use.  Just be careful you dont transmit on 435 mhz.  I did, and the transistor will pop instantly.

I put my preamp between the 435 feed and the diplexer.  Its safe with up to 20 watts TX on 145, no burnouts... I worked the last pass running that much, I havent tried it with more.  No filtering on the input, used an arrow-like HB antenna.  Pretty rugged, if its not mistreated (ie. transmitting on 435).

Also, I am working on an eggbeater for use on the SSB birds.  Going to start testing the 435 version after I send this email off.  Because I'm not switching the preamp, I have to go this route with seperate TX/RX antennas for these birds.

 Michael Heim
ARS KD0AR



----- Original Message ----
From: Doug Faunt N6TQS +1-510-655-8604 <faunt@panix.com>
To: kd0ar@sbcglobal.net
Sent: Sunday, August 31, 2008 1:37:14 PM
Subject: Re: [amsat-bb]  preamps

Does it improve the FT817?  Mine seems to work well, but for $20....
I use the 817 for RX, and an ICOM IC706MKIIG or IC7000 for TX.

73, doug

   Date: Sun, 31 Aug 2008 09:59:33 -0700 (PDT)
   From: Michael Heim <kd0ar@sbcglobal.net>



   A recent post mentioned the need for a preamp.  This reminded me of something I want to share with the group.

   Station here consists of an FT-817ND and an FT-857D.  The 817 is pretty sensitive on UHF, but the 857 is a little lacking in comparison.

   I was looking for a preamp online that would help, especially with the 857.  I went and ordered a Ramsey PR40.  I figured for $15 I couldnt go wrong.  Although its not a GaAs device, (its a bipolar), it works pretty well.  I actually didnt want a GaAs because I was afraid of blowing the device anyway, being I'm running a homebrew "Arrow style" antenna on a fixed elevation mast, and the 144 MHz leakage getting into the preamp would probably blow the device the first time I keyed.

   I am not using any TR switching on the preamp. (I only work the FM birds at this time).  

   After building the kit, I put it up, worked a pass on AO-27, then goofed and sent 432 TX energy up the line, blew the amp.  I ordered replacement transistors from MCM for $.52 each!

   Although I cannot measure noise figure, it specs at 1dB, 15 dB gain.  I know it makes a HUGE difference on my end.  Satellites that were noisy before are now full quieting and armchair copy

   I have found this item a very cost effective solution.  I wanted to share this experience with the group.  I'm just pleased with the preamp and of course, receive no personal gain by recommending this product.

    Michael Heim
   ARS KD0AR
   _______________________________________________
   Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
   Not an AMSAT-NA member? Join now to support the amateur satellite program!
   Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home