[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: LMR400 or 400UF?



Between your antenna and the preamp is where you want your best coax  
at, cause every bit of loss you have there, is lost.

Once it's past the preamp, it will give you good gain, so then it's  
just how paranoid you are, as to how much loss you are willing to give  
up, to get it into your shack.

If your preamp has a noise level of like 1db, you should be able to  
safely loose 1db in coax from your preamp to your shack, and at  
40feet, your talking about rg8, maybe mini8 (1.2db I believe).

I'm one of the paranoid people, and normally keep my losses <1db, and  
most of them are <.5 db

Quoting Michael Tondee <mat_62@netcommander.com>:

> I need to rework my 70cm antenna system and was thinking about going  
>  with LMR 400. I have about a 40 foot run. Is there any real   
> advantage to using the ultra flex for the entire run or can I get by  
>  with a short section of the UF between the preamp and antenna to   
> accomodate the rotor turning? How about just using a short section   
> of RG8U there instead of the LMR400UF? I'm trying to do this on a   
> budget.
> Tnx and 73,
> Michael, W4HIJ
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>




_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home