[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

re polarity control help needed



Hi all, I have built a simple polarity control box to allow V, H, RHCP & LHCP off my 6 element homebrew crossed yagi.
The yagi had an SWR of 1.1 to 1 on 145mhz on the 45degree and 135degree elements, so they are fine.
The control box is a copy off the G6LVB website and the VHF/UHF manual 4th edition.
The unit is basically 2 x 1/4waves of 75ohm coax to use as a matching unit and then relays to switch in or out 1/4 wave and a 1/2wavelength of 50ohm coax to give the different polarities.
My small problem is although the SWR through all the modes is under 1.5 to 1 I would like to bring it down a little, but is it worth the effort?
results:
V polarity 144mhz 1.2 to 1, 145mhz 1.3 to 1, 146mhz 1.5 to 1
H polarity 144mhz 1.5 to 1, 145mhz 1.3 to 1, 146mhz 1.2 to 1
RHCP      144mhz 1.1 to 1, 145mhz 1.3 to 1, 146mhz 1.5 to 1
LHCP       144mhz 1.5 to 1, 145mhz 1.3 to 1, 146mhz 1.1 to 

Am I worrying over nothing or should I go and alter the unit to give a slightly better result, my head says 'leave lt alone or you will muck it up'.
But I am also thinking a little shorter cable might be all it needs?
Does anyone know by looking at the figures what cable needs to be altered (longer/shorter).
Thanks for any advice
regards
Gus M0IKB 

-- 
I am using the free version of SPAMfighter for private users.
It has removed 1298 spam emails to date.
Paying users do not have this message in their emails.
Get the free SPAMfighter here: http://www.spamfighter.com/len
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home