[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: re best transceiver for sats



I have done it both ways.  I have a IC910H and just bought the 1.2 Ghz 
module.  If you have seperate radios, that will get you started.  You 
will need to purchase a 1.2 Ghz transverter unless the radio has that 
support in it.  If I can operate full duplex vs half duplex, I will go 
for full duplex.  One feature that I picked up on the 910H was AFC, 
which makes operating the FM birds really nice.  Once I acquire the 
satellite, the radio takes care of keeping it tuned on the downlink.

Ron
KA4KYI

Angus wrote:
> Hi all,
> just wondering what you think is the best transceiver or transceivers for the satellites. By this I mean to be able to TX and RX at the same time (covering from 144mhz, 70cm and 23cm), was thinking possibly something like the ICOM IC910 (with 23cm board added) so that USB downlink and LSB uplink can be done (can the TS2000 do this also). Or is it better to have 2 seperate radios altogether, and use one for the uplink and one for the downlink?
> Any thoughts or what do you think is the ultimate set up, doing quite well here with very simple FT817 and old FT480R but using transverter for 23cms.
> regards
> Gus M0IKB
> 
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home