[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Commercial Mode L Antenna sources



I'm surprised how few people have mentioned parabolic dishes during this 
discussion about commercial Mode L antennas.  L-band uplinks are mostly 
used in combination with a S-band downlink.  Most people build L/S 
equipment with HEO satellites in mind.  A single yagi or helix doesn't 
usually provide sufficient gain for L/S band use with a HEO satellite. 
You need the gain of a dish for satisfactory S-band reception of a HEO 
satellite.  So one practical solution is an oversized dish with a L/S 
dual-band feed (helix or patch).  A 4-foot dish was proven to work well 
for this on AO40.  In my opinion a single 4-foot dish is more practical 
than, for example, cobbling together multiple yagi/helix antennas for 
S-band downlink and multiple yagi/helix antennas for L-band uplink.

My 4-foot dish and dual-band patch feed were purchased commercially from 
Teksharp (Rick Fletcher KG6IAL).
http://www.plumdragon.com/teksharp/hr_AO-40_products.htm
The dual-band patch feed is sold fully assembled and tested, but the 
dish was a kit.  I had to locally purchase 1/4 inch hardware cloth, cut 
it into 8 "petals", and use 200 zip ties to attach the petals to the 
frame of the dish.  A mesh dish has somewhat less wind loading than a 
solid dish.  That's important because a solid 4-foot dish has a maximum 
wind load of more than 12 square feet, exceeding the wind load rating of 
my G-5500 rotor.  A picture of my satellite antennas can be seen here:
http://s238.photobucket.com/albums/ff239/Wayne_Estes/Ham%20Radio/

Wayne Estes W9AE
Oakland, Oregon, USA, CN83ik
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home