[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: SatPC32 V12.8

For the Icom radios, an additional handshaking line must be connected to prevent the program from trying to write to the radio while it is transmitting.  CAT control will not work unless this signal is wired up.

See the file SatpcISS.txt in the SatPC32 folder for details.

George, KA3HSW

-----Original Message-----
>From: James Denneny <57JNDenneny@comcast.net>
>Sent: May 30, 2008 10:24 AM
>To: amsat-bb@amsat.org
>Subject: [amsat-bb]  SatPC32 V12.8
>V12.8 is up and running.  I learned the hard way that it is essential (as
>instructed) to copy all SatPC32 files into a new folder I named SatPC32_127.
>Then totally uninstall  SatPC32 including removal of folder.  Then, do a
>regedit  removal of all vestiges of SatPC32 values before installing V12.8.
>I could then copy all my setup, keps etc from the SatPC32_127 folder to
>One thing noted - when running SatPC32ISS V12.8, the CAT feature is not
>working with my IC910H.  The CAT works with the regular SatPC32 v12.8
>program.  Is this normal?
>Jim K7EG
>Auburn WA

Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb