[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

SatPC32 12.8 released



Erich Eichmann DK1TB has released SatPC32 version 12.8 which contains 
improvements for Windows Vista compatibility, CAT control of multiple 
radios, and CAT control of Icom half-duplex radios.

A demo version may be downloaded from the author's web site:
http://www.dk1tb.de/indexeng.htm

Here are the changes listed in the 12.8 "What's New" file:

1. The 16-bit setup program has been replaced by the
     latest 32-bit Vista compatible version of Installshield
     Express.


  2. The CAT steering functions of SatPC32 have been expanded:

  a. The program now supports Doppler tuning with a single
     ICOM IC-706MKIIG, IC-7000 and compatible radios,
     although these radios are not full duplex satellite
     transceivers. Previous versions of SatPC32 already support
     satellite operation  with a single one of the Yaesu half
     duplex radios FT-817, FT-857, FT-897.

     With half duplex transceivers you can't hear your own
     signal on the downlink like you can with full duplex
     radios. However, the program automatically sets the uplink
     and downlink frequencies to the correct values. So, it
     allows voice operation over FM and SSB satellites and
     also digital operation. Read the "Hints for .... users
     of Icom radios" how to calibrate SSB frequencies when
     using a half duplex radio. The file can be opened from
     the SatPC32 menu "?" / "Hints for...".

  b. Full duplex satellite operation with 2 separate radios
     for uplink and downlink has been improved.

     Previously, one had to run the tool TxController (that came
     with SatPC32) to steer 2 separate radios. SatPC32 then
     steered the RX radio directly and TxController the second
     radio as the TX. Via DDE, TxController received the data
     calculated by SatPC32, using the data to steer the mode and
     frequency of the TX radio.

     A problem occured when the user switched between a V/U
     satellite (uplink on VHF, downlink on UHF, e.g. AO-51) and
     an U/V satellite (uplink on UHF, downlink on VHF, e.g.
     VO-52). With V/U satellites the VHF radio had to run as
     the TX and the UHF radio as the RX, with U/V satellites the
     situation was vice versa.  Since TxController could only
     steer the TX radio, a second instance of SatPC32 and
     TxController and a program re-start were necessary when
     the user switched between such satellites.

     Now SatPC32 itself steers also the second radio directly.
     The configuration can be done in the "Radio 2" section of
     the menu "Radio Setup".

     Numerous devices can be combined, e.g. the Yaesu semi
     duplex transceivers with each other or with Icom semi
     duplex radios or single band radios or Icom radios with
     each other.

     With 2 Icom radios only a single serial port is required.
     Both radios can be connected in parallel to the
     CAT interface.

     When the user switches from a V/U satellite to a U/V
     satellite or vice versa the program will (optionally)
     exchange the roles of both radios as TX and RX.
     Example: With FO-29 a FT-817 (that is connected to the UHF
     antenna) runs as RX, an IC-706MKIIG (that is connected to
     the 2m antenna) runs as TX. When the user tunes the FT-817
     with the VFO around the passband the program will
     automatically tune the frequency of the IC-706MKIIG to the
     correct uplink frequency and the user will immediately hear
     his signal on the new frequency.
     When the user switches to a U/V satellite the IC-706MKIIG
     will run as the RX on VHF. When the user tunes it's VFO the
     program will tune the FT-817 to the correct UHF uplink
     frequency.


  3. The Vista compatibility has been improved. Previously the
     SatPC32 data files were stored in the SatPC32 program folder.
     They could be edited with Notepad.

     Under Windows Vista, however, this method causes problems
     if the new "User Account Control" (UAC) is activated
     (recommended by Microsoft). Then Vista inhibits changes of
     the original data files and creates copies with the changes
     instead. Vista saves these copies in a hard-to-find
     "compatibilty" folder.

     Therefore the SatPC32 data files are no longer stored in the
     program folder but in a sub folder 'SatPC32' in the system
     folder for application data.

     The program displays the path of this data folder in the
     bottom line of the menu 'Satellites'.


  4. SatPC32 now includes a simple text editor that can alternatively
     be used besides Notepad to edit auxiliary files (data files,
     i.e. Doppler.SQF).

     In the file DivOptions.SQF the user can choose whether
     auxiliary files are to be  opened with Notepad or with the
     built-in editor.


  5. Further improvements:

  a. SatPC32 supports now the FMN (narrow FM) mode of the IC-910H.
     In the file Doppler.SQF enter FMN as the mode if this mode is to be
     set.

  b. With previous  version the menu "CAT" needed to be closed
     when the satellite is changed. Otherwise the program could not
     update the frequency list. That has been changed. So, the CAT
     window can now be left open during operation. It should then be
     moved out of the main window.

  c. The program now shows the file date of the selected Keplerian
     data file in the bottom line of the menu "Satellites". So the
     user immediately knows whether the data should be updated.

  d. SatPC32ISS:
     CAT steering of the FT-736R didn't work reliably when the
     satellite's uplink and downlink frequency are the same, e.g.
     the packet frequency of the ISS on 145.825 MHz. This has been
     fixed.

  e. Some minor bugs have been fixed.

"Registered" SatPC32 users may use their existing registration code to 
activate the downloaded new version.  New users are encouraged to 
purchase a registration code from AMSAT-NA, AMSAT-DL, or AMSAT-UK.  The 
online store is down at the moment but you may purchase a registration 
code by calling Martha at the AMSAT office at 888-322-6728.   Version 
12.8 will not be available on CD until the existing stock of 12.7 CDs is 
depleted.

Erich Eichmann DK1TB has donated SatPC32 to AMSAT, so all proceeds 
support amateur satellite programs.  Please support amateur satellites 
by registering your copy of SatPC32.

Wayne Estes W9AE
AMSAT Area Coordinator
Oakland, Oregon, USA, CN83ik


_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home