[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]
Re: 145 MHz IF on V/s?
- Subject: [amsat-bb] Re: 145 MHz IF on V/s?
- From: Ronald Nutter <rnutter@xxxxxxxxxxxxxx>
- Date: Sun, 18 May 2008 18:46:38 -0500
Kyle:
I am using a K5GNA downcoverter with the IF set for 145. I dont
experience any desense in V/S mode. I have tried two different antennas
and still no desense. I do have the antenna set for vertical
polarization and the VHF uplink beam is set for horizontal polarization.
Ron
KA4KYI
K & R Yoksh wrote:
> Hi all,
>
> Thanks for the replies, however, I've still not had my question answered, so
> I'll ask again.
>
> I'd like to hear from anyone using a 145 MHz IF when working mode V/s. Do
> you experience
> desense when operating V/s, but not other uplink modes?
>
> I'm planning to use my AIDC 3731 with 145 MHz IF when I install my dish this
> summer. I really want to use it for HEO operation, but it'd be a bonus if I
> could also work the LEOs.
>
> I could go with a 123 MHz IF unit if that'd work better.
>
> Thanks and 73,
>
> Kyle Yoksh
> K0KN
> Olathe, Kansas
>
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
AMSAT Home