[amsat-bb] Re: 145 MHz IF on V/s?

["Andrew Glasbrenner" <glasbrenner@xxxxxxxxxxxxxx>]

I've never had desense issues with either my Transsystems mounted at the 
dish at the old station, or with the Keps.it d/c I now use that sits on top 
of the rig. It's been a real non-issue here.

73, Drew KO4MA


----- Original Message ----- 
From: "K & R Yoksh" <yokshs@sbcglobal.net>
To: "Amsat BB" <amsat-bb@amsat.org>
Sent: Sunday, May 18, 2008 6:56 PM
Subject: [amsat-bb] 145 MHz IF on V/s?


>
> Hi all,
>
> Thanks for the replies, however, I've still not had my question answered, 
> so
> I'll ask again.
>
> I'd like to hear from anyone using a 145 MHz IF when working mode V/s. Do
> you experience
> desense when operating V/s, but not other uplink modes?
>
> I'm planning to use my AIDC 3731 with 145 MHz IF when I install my dish 
> this
> summer. I really want to use it for HEO operation, but it'd be a bonus if 
> I
> could also work the LEOs.
>
> I could go with a 123 MHz IF unit if that'd work better.
>
> Thanks and 73,
>
> Kyle Yoksh
> K0KN
> Olathe, Kansas
>
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb 

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb