[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: 416TB help



Swap the coaxes to the two haloves of the beam.

w0dxz@aol.com wrote:
> I have an old 416 TB, need wiring help.? It currently has been wired for use with? the PS-4 switching box,,, instructions say that as wired, it will be LHC when not energized,,,? RHC only when energized.
> I want the opposite,,, RHC when NOT energized.??? (I am not going to energize?? --? not going to use? the PS-4)
>
> How do I wire it to be RHC when NOT energized... 
>
> ?I do not have the original wiring harness for use without the PS-4. 
>
>
> or should I just go down to HRO and buy a linear? 432 antenna?? I need RHC or linear, i dont care which. 
>
> Bob W0DXZ DM33? Sun City AZ
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
>
>   


-- 
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
Nigel A. Gunn. 59 Beadlemead, Milton Keynes, MK6 4HF, England. 
Tel +44 (0)1908 604004       mobile +44 (0)7951079089
e-mail nigel@ngunn.net             www  http://www.ngunn.net 
Amateur radio stations  G8IFF, KC8NHF
Member of  ARRL, GQRP #11396, QRPARCI #11644, SOC #548,  Flying Pig #385,
           Dayton ARA #2128, AMSAT-NA  LM-1691,  MKARS,  RAYNET
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home