[amsat-bb] Re: cross boom?

["Michael A. Tondee" <mat_62@xxxxxxxxxxxxxxxx>]

I used schedule 80 PVC with a large wooden dowel pushed inside for added 
rigidity. I sealed each end with epoxy. It's been going strong for a couple 
of years now. I saw your other post about antennas. At present I'm using a 
four element 2 meter beam and an 11 element 70cm beam in vertical 
polarization. Both are homebrewed using  Ken Britain's "cheap yagi" design.
73,
Michael, W4HIJ
----- Original Message ----- 
From: <w0dxz@aol.com>
To: <amsat-bb@amsat.org>
Sent: Friday, April 04, 2008 10:36 AM
Subject: [amsat-bb] cross boom?


> In putting together my antenna,?? (144-432)I need something to use as a 
> horizontal- cross? support boom. What would be the best length, and,? what 
> would be the minimum length,,,? would 6? ft separation be OK?? To minimize 
> problems, should I mount one beam horizontal, one vertical? Does it matter 
> which one, is? which way?
>
> I doubt I can find a fiberglas boom locally,,,? what else could I use?? 
> or, where can I order a fiberglas boom?
>
> thanks
> Bob W0DXZ
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.519 / Virus Database: 269.22.6/1360 - Release Date: 4/4/2008 
> 6:02 PM
>
> 

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb