[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: ARR pre amp Query



Bob, 
There's a  ground lug and small pin on the preamp. 
I put a female pin on the wire for the 12 volt connection and 
soldered on the ground.  I have 2 of those and they work great. 
Even run them  from a HT battery when operating portable, maybe
9.6 volts or so, works fine. 

73
John K6YK

On Mon, 31 Mar 2008 11:04:00 -0400 w0dxz@aol.com writes:
> I am thinking aobut ordering an ARR pre amp for 432,,, I see the pin 
> for 12V DC,,, what type of connector does this take, or do you have 
> to solder the? wire to the pin? That seems a bit crude. 
> Canby one use the ARR product, and how do you connect the 12V to 
> it?
> Bob
> W0DXZ
>
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home