[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: ARR pre amp Query



You can also power it from the coax to the radio.  If you have something 
like an Icom 910 it's very nice, the preamp button on the radio will put 
12v on the coax and power the ARR preamp or bypass the preamp as you 
like.  You don't need to use the power connector.

jeff
AD6EO

K7WIN - Jeff wrote:
> Hi Bob,
> 
> The Advanced Receiver pre-amp that I purchased (MSP432VDG-160) came with the 
> power connector. You will need to solder the wires to the connector. I found 
> some old RG-58 that I used to run the power to it.
> 
> Very nice pre-amp by the way.
> 
> 73, Jeff
> K7WIN
> 
> 
> ----- Original Message ----- 
> From: <w0dxz@aol.com>
> To: <amsat-bb@amsat.org>
> Sent: Monday, March 31, 2008 8:04 AM
> Subject: [amsat-bb] ARR pre amp Query
> 
> 
>> I am thinking aobut ordering an ARR pre amp for 432,,, I see the pin for 
>> 12V DC,,, what type of connector does this take, or do you have to solder 
>> the? wire to the pin? That seems a bit crude.
>> Canby one use the ARR product, and how do you connect the 12V to it?
>> Bob
>> W0DXZ
>> _______________________________________________
>> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>>
>>
> 
> 
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
> 

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home