[amsat-bb] Re: ARR pre amp Query

[Ronald Nutter <rnutter@xxxxxxxxxxxxxx>]

I have a couple of these.  I think they are meant for "permanent" 
installation.  What I did was to create a wiring harness of sorts.  I 
soldered one wire to a alligator clip and one to a soldering lug.  The 
soldering lug goes underneath a screw.  The alligator clip goes to the 
other "pin".

Ron

w0dxz@aol.com wrote:
> I am thinking aobut ordering an ARR pre amp for 432,,, I see the pin for 12V DC,,, what type of connector does this take, or do you have to solder the? wire to the pin? That seems a bit crude. 
> Canby one use the ARR product, and how do you connect the 12V to it?
> Bob
> W0DXZ
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
> 
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb