[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Ft-736 problem



Randy,

Do you perhaps have the meter set to display ALC activity? It would most
likely normally stay 'hard left' in FM mode if this is the case.

Matt, KC4YLV


On Fri, Feb 29, 2008 at 2:59 PM, randy <vann67@charter.net> wrote:

> When i key the mike the needle does not move forward to indicate the power
> output level but instead moves to the left and bottoms out. I have set the
> drive output to various levels but it still fails to indicate power. I know
> it's putting out power because i can hit repeaters but it won't indicate it
> by the needle going forward. It goes in the opposite direction to the left.
> Any help will be appreciated., Thanks, Randy
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home