[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: RS0ISS-4 and RS0ISS-11



RS0ISS-4 is the Packet Beacon ID and Digipeater (Sometime RS0ISS-3 depending on the radio mode configuration). The simple way to use the Digi is use the alias (ARISS) in your path name which works for both modes.
 
RS0ISS-11 is ID for the mailbox in the Kenwood D700. You need to have a very good station to use it in high usage areas due to all the collisions from ground stations.
 
Kenneth - N5VHO

________________________________

From: amsat-bb-bounces@amsat.org on behalf of Bob Cutter
Sent: Tue 2/26/2008 9:43 AM
To: amsat-bb@amsat.org
Subject: [amsat-bb] RS0ISS-4 and RS0ISS-11



What are the differences between these two?

73, Bob KI0G


      ____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb


_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home