[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: SatPC32 with two Icom radio's...Help!!



 Hi Mark,
 I actually investigated that when I was shopping for used radios because I 
didn't know what brand I was going to ultimately get. Problem is, it would 
take two comports and I'd have to build a second rig/PC interface as well. 
The Icom's are supposed to avoid having to do that. I have made some 
progress tonight though, I actually had the 706 tracing the 10 meter 
downlink of AO-7 while the 820 was tracing the 2 meter uplink. The doppler 
tracking frequency changes just seemed much slower than I remember with my 
TS-2000. Could just be my memory though... hi hi.  I should say I was 
theoretically tracking AO-7, I wasn't actually listening and have no idea 
what mode it was really in. My antenna system is still in a bit of disarray. 
Still using the SAEBRTrack and Gemini OR-360 rotators though!
73,
Michael, W4HIJ
----- Original Message ----- 
From: "Mark L. Hammond" <n8mh@embarqmail.com>
To: <amsat-bb@amsat.org>; "Michael A. Tondee" <mat_62@netcommander.com>
Sent: Thursday, February 14, 2008 8:57 PM
Subject: Re: SatPC32 with two Icom radio's...Help!!


>
> Hi Michael,
>
> Have you tried to use the auxiliary program found here:
>
> "C:\Program Files\SatPC32\TxControllerD\TXController.exe"
>
> I've used that to control 2 rigs at the same time...works pretty slick! 
> Maybe you can skin the cat this way instead?
>
>
> Mark
>
>
>>Date: Thu, 14 Feb 2008 16:18:41 -0500
>>From: "Michael A. Tondee" <mat_62@netcommander.com>
>>Subject: [amsat-bb]  SatPC32 with two Icom radio's...Help!!
>>To: "Amsat-Bb@Amsat. Org" <amsat-bb@amsat.org>
>>Message-ID: <000601c86f4f$2cd38ba0$6500a8c0@w4hij>
>>Content-Type: text/plain;       charset="iso-8859-1"
>>
>>Hi,
>>I'm hoping that someone on the board can help me because I'm having 
>>problems trying to get my setup to work. I am now the proud and happy 
>>owner of an Icom 820H and an IC706-MKIIG. I have built and tested  a CT17 
>>type interface circuit and I have it hooked up and working. The problem 
>>I'm having is setting up the dual radio configuration of SatPC32. I've 
>>read the help file many times over but I cannot seem to get the radio 
>>addresses configured as Erich states. Going by the file I'm assuming the 
>>addresses should read $42 $58 in the top address box and $58 $42 in the 
>>lower box. Nothing I do will make this happen. If  I alter them to that 
>>configuration, as soon as I hit the "address ok" button the lower box 
>>changes and both both boxes read $42 $58. There is some reference to using 
>>the "mode menu" in the file but I can't figure out where it helps. Another 
>>question I have is, should the transceive option be turned off on one or 
>>both rigs? I've tried every combination I can think of.
>> This is what I'm trying to accomplish if possible, I want be able to use 
>> 2 meters on the 820 as the uplink and 10 meters on the 706 as the 
>> downlink. Mode A Oscar 7 in other words. I want to be able to use a 2 
>> meters on the 820 as the uplink  and use the 706 in concert with my mode 
>> S down converter for my downlink. I'd also like to be able to sometimes 
>> use the 820 as a stand alone sat rig without the 706 involved at all. 
>> That's the only configuration I can get working at all right now. I hope 
>> all of the above makes sense because I must just be totally missing 
>> something in the help file and I'm getting frustrated as I'm anxious to 
>> be back on the birds.
>>Tnx for any help and advice anyone can offer,
>>73,
>>Michael, W4HIJ
>>

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home