[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: FT-847 Serial Port Communications



Alan 

I would like to than you for the information that you provided, as it
corrected the situation to where the memories downloaded so that I could
edit them and upload the new .CSV file.  The CAT program works too.  I also
appreciate others that offered suggestion too.  

Gary
N0EZH

-------Original Message-------
 
From: Alan P. Biddle
Date: 2/10/2008 6:00:22 PM
To: amsat-bb@amsat.org
Subject: [amsat-bb] Re: FT-847 Serial Port Communications
 
Gary,
 
Do you have a FC-20 auto tuner attached?  If so, remove the FC-20 connector,
and turn the rig off and back on.  The auto tuner and CAT port use the same
circuitry and are, with some caveats, incompatible.
 
Some _very_ early models did not have a bi-directional CAT port, which would
certainly cause a problem with a CAT program, and possibly with a cloning
program expecting a bi-directional port.
 
You seem to have eliminated all the usual cable and port configuration
glitches.
 
73s,
 
Alan
WA4SCA
 
 
 
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home