[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Cable question



Use a cable with a stranded center conductor and braided shield for the 
section that will move. I used the flexible version of LMR400 at my previous 
QTH. These have higher loss than other types, but solid center conductors 
and foil shields will fail in a year or so when flexed repeatedly.

73,

John
KD6OZH

----- Original Message ----- 
From: "Ollie Eisman" <ollie@earthrobot.com>
To: "AMSAT BB" <amsat-bb@amsat.org>
Sent: Tuesday, January 08, 2008 17:31 UTC
Subject: [amsat-bb] Cable question


> Hi everyone,
>
> I would like to use a G-5500 rotor on top of a 20' telescopic mast with
> 2m and 70cm sat antennas.  Assuming this isn't a bad idea to begin with,
> my next goal is to find RF cables that will work best with this type of
> tower given it will be raised and lowered frequently, thus causing a lot
> of extra cable flex.  (I am not even sure of the best way to run cables
> up the to rotors when the mast is telescopic - ideas?)
>
> I am looking at 20+' for the tower plus another 50' or so back to the
> shack.  An suggestions?
>
> Love those covenants... :)
>
> 73,
> Ollie, AJ1O
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb 

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home