[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Pre-amps



Hi All,
 Here is a link to a noise figure meter project. Even if it is not 
calibrated it can be used for comparitive measurments.
http://www.ham-radio.com/sbms/sd/nfsource.htm

Happy Holidays,
 Art , KC6UQH


----- Original Message ----- 
From: "Tony Langdon" <vk3jed@gmail.com>
To: <vk4tec@people.net.au>; "Amsat-Bb@Amsat. Org" <amsat-bb@amsat.org>
Sent: Saturday, December 22, 2007 5:56 PM
Subject: [amsat-bb] Re: Pre-amps


> At 11:38 AM 12/23/2007, Andrew Rich wrote:
>
>>So I took a gamble and put in the VHF parts instead.
>>
>>Bingo S1 to S9 improvement.
>
> OK, but the important thing is what is the improvement in S/N?  If
> the preamp has too high a noise figure, all you'll end up doing is
> moving the S meter a bit more...   What you're aiming to do is
> improve the S/N of the received signal.
>
> If the S/N doesn't change, you will still gain an improvement by
> siting the preamp at the masthead.  If it does improve with the
> preamp at the radio, the improvement will be even more with the
> amplifier correctly installed at the antenna.
>
> 73 de VK3JED
> http://vkradio.com
>
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb 

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home