[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Ande-1 and RS0ISS-4 Frequencies ?



You have the frequency correct. Make sure your path has UNPROTO via ARISS set and you are using standard AX.25 packet. That should do the trick for both. ANDE is hard to hit and hear but ISS is usually not a problem.
 
 
Kenneth - N5VHO

________________________________

From: amsat-bb-bounces@amsat.org on behalf of K7XQ
Sent: Sun 12/9/2007 2:09 PM
To: amsat-bb@amsat.org
Subject: [amsat-bb] Ande-1 and RS0ISS-4 Frequencies ?



Been trying to send a beacon on 145.825 MHz APRS to these satellites with no
response ( 50 watts and vertical ) for several weeks now.

Have these satellites been reprogrammed for another protocol or another
frequency other than 145.825 ??




K7XQ Jeff
Atwater, CA.
Grid: CM97qi
EME, Satellites, Meteor Scatter
CW, JT-65 , SSB
50 MHz: 2 X M2 6M7 1000 watts 2 X 3-500
144 MHz: 4 X XPOL M2 2MPX28 XPOL 1500 Watts Single GS35b
222 MHz: 1 X M2 5 W.L. 350 watts   Single 8930
432 MHz: 4 X M2 9 W.L. Modified for XPOL 1500 Watts single GS35b
1296 MHz: 3.0 meter dish VE4MA circular feed 350 Watts single GS15
water-cooled
2304 MHz/2320 MHz/2424 MHz: 3.0 meter dish VE4MA circular feed 200 watts
Spectrian SSPA
10 GHz: early 2008

K7XQ Webpage:  http://www.elite.net/~k7xq/k7xq.html



_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb


_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home