[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Wanted: 70 cm helix design

S1 to S5 improvement on GO-32

16 standoffs
3 inch spaces between dowel standoffs
8-1/8 diameter loop
1/2 inch between first 1/2 turn and the 300x300 reflector (have to make
N connector
16 x 3 inch = 48 inches plus 1/2 inch = 48.5 inch boom.
PVC boom
Dowel standoffs
Liquid nails the standoffs into the pvc boom
Drill a little hole in the end of each dowel.
Tiny cable ties hold the coil in place
3 mm fencing wire.

Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb