[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Where can I buy pre-made feedline?




On Dec 4, 2007, at 10:04 PM, Edward Cole wrote:

> Next time chose LMR-400 instead.  If you assemble N-connectors the  
> braid is clamped and only requires soldering the center pin which is  
> gold-plated on most N-connectors.  If you equipment has UHF  
> connectors just use a short piece of RG-213 or RG-58 with a PL-259  
> on one end and an N on the other (or use a N/UHF adaptor).

Why LMR-400?

I would've like to use N connectors, but the equipment has PL-259, and  
I don't want the losses from an adapter.

-- 
Rick

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home