[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]
Re: Radio Shack Rotator Voltage
- Subject: [amsat-bb] Re: Radio Shack Rotator Voltage
- From: "Bob Bruninga " <bruninga@xxxxxxxx>
- Date: Wed, 21 Nov 2007 21:00:18 -0500 (EST)
> I just picked up a used Radio Shack 15-1254
> Rotator only..no control box or specs...
> Does anyone know what the drive voltage
> requirements is on these 1
I use them in my $65 tracking system. See the schematic on my web page: http://www.ew.usna.edu/~bruninga/rotator1.html
Its about 24-30 VAC with a capacitor to provide phase shift to give the correct direction.
Bob, WB4APR
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
AMSAT Home