[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: IC-910 Pre-amp Problem



You did enable the preamp setting in the set menu right? Press and hold set 
until the display changes, then use the up and down keys to go to pre 144, 
pre 440, or pre 1200, use the dial to go to yes, then press set again.

73, Drew KO4MA
----- Original Message ----- 
From: "Steve kb9ups" <kb9ups@excite.com>
To: <amsat-bb@amsat.org>
Sent: Wednesday, November 07, 2007 8:38 PM
Subject: [amsat-bb] IC-910 Pre-amp Problem


>
> Hello all,
>
> I have an IC-910. Just tried to power up the Icom pre-amps with No Luck..
> I set pre-amps to "on", pushed the button and "?".  The display indicator 
> flashes 5 times and goes out..no power.
> Tried the amps on my other 910 and they work great and the indicator stays 
> on...both bands.
>
> Does anyone know what may be wrong with the 910?
>
>
> Steve/kb9ups
> ARISS Mentor
> AMSAT area coordinator, Toledo, Oh.
> AMSAT area coordinator, Streator, IL.
> www.qsl.net/kb9ups
>
> _______________________________________________
> Join Excite! - http://www.excite.com
> The most personalized portal on the Web!
>
>
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb 

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home