[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: Email via Satellite Simulated Emergency Test



I can see this would be very handy in a ham rich environment where the
down linked message would likely to be received. This is great for
Europe and N. America. Places like Asia, Australia, Africa and Oceania
are less likely to have much success getting the word out since no one
in the footprint would be listening.


Kenneth - N5VHO

-----Original Message-----
From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On
Behalf Of Robert Bruninga
Sent: Monday, November 05, 2007 4:02 PM
To: 'Amsat-BB'
Subject: [amsat-bb] Email via Satellite Simulated Emergency Test

The value of sending an Email via APRS Satellite in an emergency
is that it is a set-and-forget outward bound communcations mode.
Perfect for real emergencies.

You don't need anything but a 2m radio and a TNC.  No special
software.  No special hardware, no satellite predictions, and no
time consuming operating.

Just set the Email message in your TNC beacon, turn it on, and
then return to all the emergency tasks at hand.  Think Katrina.
You wanted to report your status, but had no time for the tedium
of "operating" to find a means to get your traffic out.  There
was just too much else to do...

In real emergencies, those affected have far too much else to do
than to try to make a satellite contact to report back their
location and status.  But using an APRS beacon allows you to set
up your outgoing message (or email), with no knowledge required
about satellite pass times.  Sooner or later an APRS satellite
will pass over your location and your beacon and EMAIL will get
in without any effort on your part.

Your emergency health and welfare email will not only get
relayed by the satellite to a SATgate, but should then be
automatically emailed to the intended recepient.  You did not
need any special software, no satellite predictions, no special
hardware other than a TNC and 2m radio.

This is the ideal first-response health-and-welfare-status
reporting mechanism.  Put your beacon on the air and then do all
the rest of the emregency work you have to do, and do not get
burdened with having to sit and "operate" to try to get your
message out. 

The Satellite Simulated Emergency Test web page shows you how to
use any TNC to set up your outgoing EMAIL...

http://www.ew.usna.edu/~bruninga/sset.html

Try it with your old TNC.  Anyone can do it.  But the format
must be correct for the packet that you place in your BECONTEXT:

BT :EMAIL    :email@address.com your_message_goes_here...

Where 4 spaces are required after the word EMAIL and then the
"email@address.com" must be the intended recepient.

Its only one line.  But in an emergency, ONE LINE is
exceptionally valuable, and has a great chance of getting
through.

Not only will it get delivered (if the infrastructure works) but
you can also just check the downlink yourself to see if it got
through on:

http://pcsat.aprs.org

Try it this week while PCSAT is working!

Bob, WB4APR






_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home