[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: geo stationary bird



Bob Stewart wrote:
> I was thinking the same thing.  One of the things that brought
> me back into ham radio was the challenge and new experiences.
> But a geosat sounds like it would be nothing more than
> an internet chatroom - all it takes is a connection.  Don't get me
> wrong, it will be great for EMCOMM.  But, other than that, meh.
> 
> Bob

The challenge with geosat birds due to the higher orbit (distance) and 
what not, is in how ACCURATELY you can send the proper uplink signal 
into the bird without trying it first.

(GRIN... can you calculate your uplink gain to the geosync belt 
accurately enough to send the right signal level up the first time?)

Sure, it's a one-time trick pony... but it's still a nice little math 
and knowledge of your own system setup kind of challenge.

I'm sure there'll be plenty of people blowing away the uplink and/or not 
heard until some folks do the math for them.  :-)

(Thus, LEILA on AO-40... when really, if people were doing their math 
homework and measuring their systems ahead of time -- she shouldn't have 
been necessary -- right?  There's always challenges available in RF 
systems if you look for them...)

Ask the 70's and 80's TV folks if uplink power into the video bird's 
transponders was important!  (GRIN)

They have some good war-stories of remote trucks blowing away whole 
transponders while the control rooms yelled at them on the phone to 
knock it off.

(Nowadays, the TV folks use automated systems that set their uplink 
power automatically from the control rooms that use a data channel from 
the control room through the birds that the truck systems monitor, 
unless that's changed since I last saw one in action.)

Wouldn't that be nifty?  A server/automated system that can "see" the 
bird via it's own receivers, and could command the uplink power 
automatically from mobile ham's stations so uplink tuning/aiming and 
power levels for portable stations could be automated?

Now, there's a challenge for ya!

And of course, since it's hams here, and not commercial companies that 
have control over the uplink equipment, it'd have to be a very flexible 
system, and be designed in such a way so that hams could assemble/build 
it on their own (like hams like to do) or if they're a little more lazy 
or too busy, they might be able to buy a pre-built box that someone else 
assembled, with connectors for various radios and trackers...

(Sounds like too big a project, but might be fun to try to go do on a 
limited basis by limiting which trackers and radios are supported.)

Automated anti-QRM... neat-o!

There's always cool stuff to try to do on ham radio!  :-)

Nate WY0X
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home