[Date Prev][Date Next][Thread Prev][Thread Next] - [Date Index][Thread Index][Author Index]

Re: New Preamp



Bryant,
In the spirit of learning by doing, a part of Amatuer Radio, you have taken 
the first step.
How well a preamp will work for you depends on many factors. The next step 
if things do not work well is to find ways to determine why by, seperating 
out overload, noise floor, antenna pattern, ground noise, etc. Now you are 
into learning! The most important part is not to give up until you have all 
the answers.

Good Luck,
 Art KC6UQH

----- Original Message ----- 
From: "Bryant" <bryantcw@cox.net>
To: "AMSAT BB" <Amsat-bb@amsat.org>
Sent: Saturday, September 22, 2007 4:45 PM
Subject: [amsat-bb] New Preamp


> Thanks for all the comments to my questions about "New Preamps" both on 
> the BB and off list.  I have ordered two from AR2 and I'm not going to 
> worry about  signal attenuation by the nearby pine trees.
>
> v. 73
>
> Bryant, W2RGG
> _______________________________________________
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
> 

_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



AMSAT Top AMSAT Home